Certified FD90 and FD120 fire doors for Whitley Bay
Getting FD90 and FD120 fire doors right in Whitley Bay means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Whitley Bay is about 8 miles from Newcastle upon Tyne. Wherever your building is in NE26, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Whitley Bay?
Because Whitley Bay is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD90 and FD120 fire doors prices in Whitley Bay
Guide prices for FD90 and FD120 fire doors in Whitley Bay run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
Transformer and switch rooms and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Whitley Bay as elsewhere.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Whitley Bay
Will I get certificates for the doors fitted in Whitley Bay?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Whitley Bay?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Whitley Bay and the rest of Tyne and Wear, including NE26 and nearby North Shields.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Whitley Bay.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Neighbouring areas
- North Shields (2 miles)
- Tynemouth (2 miles)
- South Shields (3 miles)
- Jarrow (4 miles)
- Wallsend (5 miles)
- Hebburn (6 miles)
Other fire doors in Whitley Bay
- Stairwell & Escape Route Doors in Whitley Bay
- Riser & Service Cupboard Doors in Whitley Bay
- FD60 Fire Doorsets in Whitley Bay
- Communal & Corridor Fire Doors in Whitley Bay
- Composite Fire Doors in Whitley Bay
- Fire Door Supply & Fit in Whitley Bay
- Double & Leaf-and-a-Half Fire Doors in Whitley Bay
- FD30S Smoke Control Doorsets in Whitley Bay
- FD90 & FD120 Doorsets across Tyne and Wear
- All fire doors in Whitley Bay