FD90 and FD120 fire doors in Cumbria: how we work
We supply and fit FD90 and FD120 fire doors across Cumbria, including Carlisle, Barrow-in-Furness and Kendal. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
Which rules apply in Cumbria?
Because Cumbria is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Cumbria?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Cumbria are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Cumbria
Cumbria has hotels and guest houses across the Lake District alongside town-centre flats and industrial sites in Carlisle and the west coast towns.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Cumbria
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door?
Yes — from a single door to a full building.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Towns in Cumbria we cover for FD90 and FD120 fire doors
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Cumbria
- FD30 Fire Doorsets in Cumbria
- FD30S Smoke Control Doorsets in Cumbria
- FD60 Fire Doorsets in Cumbria
- Flat Entrance Fire Doors in Cumbria
- Communal & Corridor Fire Doors in Cumbria
- Stairwell & Escape Route Doors in Cumbria
- HMO Fire Doors in Cumbria
- Fire Doors for Homes in Cumbria
- Riser & Service Cupboard Doors in Cumbria
- Commercial & Office Fire Doors in Cumbria
- School & Healthcare Fire Doors in Cumbria
- Timber Fire Doorsets in Cumbria
- Composite Fire Doors in Cumbria
- Steel Fire Doors in Cumbria
- Glazed Fire Doors in Cumbria
- Double & Leaf-and-a-Half Fire Doors in Cumbria
- Fire-Rated Screens & Fanlights in Cumbria
- Acoustic Fire Doors in Cumbria
- Security Fire Doors in Cumbria
- Fire Exit Doors in Cumbria
- Fire Door Ironmongery & Closers in Cumbria
- Fire Door Replacement in Cumbria
- Fire Door Supply & Fit in Cumbria
- All fire doors in Cumbria