Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in County Durham

We supply and fit FD90 and FD120 fire doors throughout County Durham, including Darlington, Hartlepool and Stockton-on-Tees, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in County Durham, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Certified FD90 and FD120 fire doors for County Durham

We supply and fit FD90 and FD120 fire doors across County Durham, including Darlington, Hartlepool and Stockton-on-Tees. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Fire door rules in County Durham

Fire doors in County Durham sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Guide prices in County Durham

Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for County Durham are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Where FD90 and FD120 fire doors are needed

County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

What you get with each doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

What happens next

  1. Tell us about the doors — photos help
  2. Free measure survey at your County Durham property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Questions about FD90 and FD120 fire doors in County Durham

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Towns in County Durham we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in County Durham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.