Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Tyne and Wear

We supply and fit FD30S fire doors throughout Tyne and Wear, including Newcastle upon Tyne, Sunderland and South Shields, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in Tyne and Wear, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Our Tyne and Wear supply and fit service

Our Tyne and Wear service covers FD30S fire doors for flats, HMOs, workplaces, schools and homes, including Newcastle upon Tyne, Sunderland and South Shields.

What the law says in Tyne and Wear

Fire doors in Tyne and Wear sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Cost of FD30S fire doors in Tyne and Wear

Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Tyne and Wear quote is fixed after survey and itemised door by door.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Typical uses in Tyne and Wear

Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

What you get with each doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Tyne and Wear

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

What is the difference between FD30 and FD30S?

Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.

Towns in Tyne and Wear we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in Tyne and Wear

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.