Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Dumfries & Galloway

We supply and fit FD90 and FD120 fire doors throughout Dumfries & Galloway, including Dumfries, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in Dumfries & Galloway, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

FD90 & FD120 Doorsets for Dumfries & Galloway buildings

We supply and fit FD90 and FD120 fire doors across Dumfries & Galloway, including Dumfries. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Which rules apply in Dumfries & Galloway?

In Dumfries & Galloway the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

What do FD90 and FD120 fire doors cost in Dumfries & Galloway?

Our guide price for FD90 and FD120 fire doors in Dumfries & Galloway is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD90 and FD120 fire doors are needed

Dumfries and Galloway is rural, with demand from Dumfries' town centre, schools, care homes and hospitality buildings.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

What you get with each doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

How it works in Dumfries & Galloway

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Common questions in Dumfries & Galloway

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Do you cover the whole of Dumfries & Galloway?

Yes. We survey, supply and fit FD90 and FD120 fire doors across Dumfries & Galloway, including Dumfries.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Towns in Dumfries & Galloway we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in Dumfries & Galloway

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.