Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 typicalKeep lockedFlush

Riser & Service Cupboard Doors in Tyne and Wear

We supply and fit riser cupboard fire doors throughout Tyne and Wear, including Newcastle upon Tyne, Sunderland and South Shields, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £550 per single doorset in Tyne and Wear, supplied & fitted, ex VAT

Flush painted service riser cupboard door set into a corridor wall

Certified riser cupboard fire doors for Tyne and Wear

Our Tyne and Wear service covers riser cupboard fire doors for flats, HMOs, workplaces, schools and homes, including Newcastle upon Tyne, Sunderland and South Shields.

What the law says in Tyne and Wear

Because Tyne and Wear is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Riser cupboard fire doors prices in Tyne and Wear

Our guide price for riser cupboard fire doors in Tyne and Wear is £550 to £950 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Where riser cupboard fire doors are used in Tyne and Wear

Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.

  • Electrical and data risers
  • Meter cupboards
  • Plumbing ducts
  • Bin and store cupboards

Doorset specification

RatingAt least half the shaft wall's rating, 30 minutes minimum — FD30 typical
ClosingKept locked shut; self-closer not normally required
LockingFlush cylinder or budget lock, tested with the door
FinishFlush, painted or laminated to match the corridor
SignageFire door keep locked
Elevation drawing of riser & service cupboard doors

See the full specification and options for Riser & Service Cupboard Doors

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

What rating does a riser door need?

In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.

Towns in Tyne and Wear we cover for riser cupboard fire doors

Riser & Service Cupboard Doors in neighbouring areas

Other fire doors in Tyne and Wear

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.