Certified FD90 and FD120 fire doors for Surrey
Throughout Surrey, including Woking, Guildford and Esher, we survey, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.
Which rules apply in Surrey?
Fire doors in Surrey sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Surrey?
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Surrey, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Surrey
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Surrey: questions
Can you fit just one door?
Yes — from a single door to a full building.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Towns in Surrey we cover for FD90 and FD120 fire doors
- Ashford, Surrey
- Banstead
- Camberley
- Caterham
- Egham
- Epsom
- Esher
- Ewell
- Farnham
- Godalming
- Guildford
- Horley
- Leatherhead
- Redhill
- Reigate
- Staines
- Sunbury-on-Thames
- Walton-on-Thames
- Woking
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Surrey
- FD30 Fire Doorsets in Surrey
- FD30S Smoke Control Doorsets in Surrey
- FD60 Fire Doorsets in Surrey
- Flat Entrance Fire Doors in Surrey
- Communal & Corridor Fire Doors in Surrey
- Stairwell & Escape Route Doors in Surrey
- HMO Fire Doors in Surrey
- Fire Doors for Homes in Surrey
- Riser & Service Cupboard Doors in Surrey
- Commercial & Office Fire Doors in Surrey
- School & Healthcare Fire Doors in Surrey
- Timber Fire Doorsets in Surrey
- Composite Fire Doors in Surrey
- Steel Fire Doors in Surrey
- Glazed Fire Doors in Surrey
- Double & Leaf-and-a-Half Fire Doors in Surrey
- Fire-Rated Screens & Fanlights in Surrey
- Acoustic Fire Doors in Surrey
- Security Fire Doors in Surrey
- Fire Exit Doors in Surrey
- Fire Door Ironmongery & Closers in Surrey
- Fire Door Replacement in Surrey
- Fire Door Supply & Fit in Surrey
- All fire doors in Surrey