Our Epsom supply and fit service
For landlords, managing agents, businesses and homeowners in Epsom, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
We cover KT17 and the surrounding area, including Ewell. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Epsom?
In Epsom, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Epsom?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Epsom quote is fixed after survey and itemised door by door.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are needed
Generator rooms and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Epsom as elsewhere.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Epsom property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD90 and FD120 fire doors in Epsom: questions
Is the survey in Epsom free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Epsom?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Epsom and the rest of Surrey, including KT17 and nearby Ewell.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Epsom.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Epsom
- Ewell (2 miles)
- Banstead (2 miles)
- Sutton (3 miles)
- Leatherhead (4 miles)
- Surbiton (4 miles)
- New Malden (5 miles)
Other fire doors in Epsom
- Fire Door Ironmongery & Closers in Epsom
- FD60 Fire Doorsets in Epsom
- Acoustic Fire Doors in Epsom
- Riser & Service Cupboard Doors in Epsom
- Fire Door Replacement in Epsom
- Communal & Corridor Fire Doors in Epsom
- Composite Fire Doors in Epsom
- Commercial & Office Fire Doors in Epsom
- FD90 & FD120 Doorsets across Surrey
- All fire doors in Epsom