FD90 & FD120 Doorsets for Redhill buildings
Looking for FD90 and FD120 fire doors in Redhill? Our supply and fit service covers RH1 and the surrounding area, including Reigate and Horley. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Redhill is about 17 miles from Woking; we cover both, along with Reigate, Horley and Caterham.
Regulations for FD90 and FD120 fire doors in Surrey
Fire doors in Redhill sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Redhill?
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Redhill, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are used in Redhill
In Redhill, FD90 and FD120 fire doors are typically needed in high fire-load stores and transformer and switch rooms.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Redhill
Do you work for landlords and managing agents in Redhill?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Redhill.
Can you fit just one door in Redhill?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Surrey.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Reigate (1 mile)
- Horley (4 miles)
- Caterham (5 miles)
- Coulsdon (6 miles)
- Banstead (6 miles)
- Purley (7 miles)
Other fire doors in Redhill
- Composite Fire Doors in Redhill
- Timber Fire Doorsets in Redhill
- Fire-Rated Screens & Fanlights in Redhill
- Fire Door Supply & Fit in Redhill
- Commercial & Office Fire Doors in Redhill
- FD30 Fire Doorsets in Redhill
- FD60 Fire Doorsets in Redhill
- Flat Entrance Fire Doors in Redhill
- FD90 & FD120 Doorsets across Surrey
- All fire doors in Redhill
