Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Horley

We supply and fit FD90 and FD120 fire doors in Horley (RH6) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,900 per single doorset in Horley, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Getting FD90 and FD120 fire doors fitted in Horley

Looking for FD90 and FD120 fire doors in Horley? Our supply and fit service covers RH6 and the surrounding area, including Crawley and Redhill. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

Horley is about 20 miles from Woking. Wherever your building is in RH6, we arrange survey and fitting dates around access and occupancy.

Fire door rules in Horley

In Horley, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

FD90 and FD120 fire doors prices in Horley

Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Horley are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD90 and FD120 fire doors are used in Horley

In Horley, FD90 and FD120 fire doors are typically needed in separating walls with long ratings and transformer and switch rooms.

Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.

  • Separating walls with long ratings
  • Transformer and switch rooms
  • High fire-load stores
  • Generator rooms

FD90 & FD120 Doorsets: key specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Surrey

Will I get certificates for the doors fitted in Horley?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Is the survey in Horley free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Which rules do FD90 and FD120 fire doors in Horley need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Neighbouring areas

Other fire doors in Horley

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.