Getting FD90 and FD120 fire doors fitted in Walton-on-Thames
Looking for FD90 and FD120 fire doors in Walton-on-Thames? Our supply and fit service covers KT12 and the surrounding area, including Sunbury-on-Thames and Esher. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our Surrey coverage includes Walton-on-Thames and its neighbours Sunbury-on-Thames, Esher and Hampton; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in Surrey
Fire doors in Walton-on-Thames sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Walton-on-Thames?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Walton-on-Thames quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Walton-on-Thames, FD90 and FD120 fire doors are most often specified for high fire-load stores and generator rooms.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Walton-on-Thames
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Walton-on-Thames
Is the survey in Walton-on-Thames free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Walton-on-Thames.
Can you fit just one door in Walton-on-Thames?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Surrey.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Walton-on-Thames
- Sunbury-on-Thames (1 mile)
- Esher (2 miles)
- Hampton (2 miles)
- Hanworth (4 miles)
- Ashford, Surrey (4 miles)
- Feltham (4 miles)
Other fire doors in Walton-on-Thames
- Fire Door Replacement in Walton-on-Thames
- FD30S Smoke Control Doorsets in Walton-on-Thames
- Fire Door Supply & Fit in Walton-on-Thames
- Security Fire Doors in Walton-on-Thames
- Glazed Fire Doors in Walton-on-Thames
- Composite Fire Doors in Walton-on-Thames
- Fire Doors for Homes in Walton-on-Thames
- School & Healthcare Fire Doors in Walton-on-Thames
- FD90 & FD120 Doorsets across Surrey
- All fire doors in Walton-on-Thames