Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in West Sussex

We supply and fit FD90 and FD120 fire doors throughout West Sussex, including Crawley, Worthing and Bognor Regis, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in West Sussex, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Certified FD90 and FD120 fire doors for West Sussex

Across West Sussex we handle FD90 and FD120 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

Regulations for FD90 and FD120 fire doors in West Sussex

Fire doors in West Sussex sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Cost of FD90 and FD120 fire doors in West Sussex

Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for West Sussex are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD90 and FD120 fire doors are needed

West Sussex combines Crawley's offices and Gatwick-related industry with coastal towns' care homes, hotels and converted houses.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

What you get with each doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

How quickly can you survey in West Sussex?

We arrange surveys around your access needs and, where possible, combine visits with other work in West Sussex. Tell us your preferred dates when you enquire.

Which rules apply in West Sussex?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Towns in West Sussex we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in West Sussex

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.