Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in North Yorkshire

We supply and fit FD60 fire doors throughout North Yorkshire, including York, Middlesbrough and Harrogate, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in North Yorkshire, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 Fire Doorsets for North Yorkshire buildings

We supply and fit FD60 fire doors across North Yorkshire, including York, Middlesbrough and Harrogate. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Fire door rules in North Yorkshire

Fire doors in North Yorkshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

FD60 fire doors prices in North Yorkshire

Our guide price for FD60 fire doors in North Yorkshire is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Typical uses in North Yorkshire

North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

Doorset specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

FD60 fire doors in North Yorkshire: questions

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you fit just one door?

Yes — from a single door to a full building.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

Towns in North Yorkshire we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in North Yorkshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.