Getting FD60 fire doors fitted in Scarborough
Looking for FD60 fire doors in Scarborough? Our supply and fit service covers YO12 and the surrounding area, including Bridlington and Beverley. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Scarborough is about 35 miles from York. Wherever your building is in YO12, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Scarborough?
In Scarborough, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Scarborough
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Scarborough are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are used in Scarborough
In Scarborough, FD60 fire doors are typically needed in stair cores in taller blocks and compartment walls.
North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
- Plant and boiler rooms
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in North Yorkshire
Do you work for landlords and managing agents in Scarborough?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
How quickly can you survey in Scarborough?
We arrange surveys around your access needs and, where possible, combine Scarborough visits with other work in North Yorkshire. Tell us your preferred dates when you enquire.
What does a Scarborough quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Scarborough
- Bridlington (16 miles)
- Beverley (30 miles)
- Redcar (35 miles)
- York (35 miles)
- Hull (37 miles)
- Middlesbrough (39 miles)
More doorsets for Scarborough
- Composite Fire Doors in Scarborough
- Fire Door Ironmongery & Closers in Scarborough
- Riser & Service Cupboard Doors in Scarborough
- Security Fire Doors in Scarborough
- School & Healthcare Fire Doors in Scarborough
- Fire Exit Doors in Scarborough
- Glazed Fire Doors in Scarborough
- Fire Door Supply & Fit in Scarborough
- FD60 Fire Doorsets across North Yorkshire
- All fire doors in Scarborough