Getting FD60 fire doors fitted in Selby
Looking for FD60 fire doors in Selby? Our supply and fit service covers YO8 and the surrounding area, including Goole and Pontefract. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Selby is about 12 miles from York; we cover both, along with Goole, Pontefract and York.
Which rules apply in Selby?
New and replacement fire doors in Selby are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Selby
Guide prices for FD60 fire doors in Selby run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
In Selby, FD60 fire doors are typically needed in compartment walls and plant and boiler rooms.
North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Selby
What does a Selby quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Selby?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Selby.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Nearby towns we cover
- Goole (9 miles)
- Pontefract (12 miles)
- York (12 miles)
- Castleford (12 miles)
- Bentley (17 miles)
- Lofthouse (18 miles)
Other fire doors in Selby
- Fire Door Replacement in Selby
- Double & Leaf-and-a-Half Fire Doors in Selby
- Communal & Corridor Fire Doors in Selby
- Composite Fire Doors in Selby
- Fire Door Ironmongery & Closers in Selby
- School & Healthcare Fire Doors in Selby
- Fire Door Supply & Fit in Selby
- Commercial & Office Fire Doors in Selby
- FD60 Fire Doorsets across North Yorkshire
- All fire doors in Selby