Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
BS EN 1154BS EN 1935BS EN 1155

Fire Door Ironmongery & Closers in North Yorkshire

We supply and fit fire door closers and ironmongery throughout North Yorkshire, including York, Middlesbrough and Harrogate, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £120 per item in North Yorkshire, supplied & fitted, ex VAT

Overhead door closer fitted to a white fire door and frame

Fire Door Ironmongery & Closers for North Yorkshire buildings

Throughout North Yorkshire, including York, Middlesbrough and Harrogate, we survey, quote and fit fire door closers, hinges and hold-open devices as complete certified doorsets, with the manufacturer's certificate reference on every quote.

Fire door rules in North Yorkshire

Because North Yorkshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Fire door closers and ironmongery prices in North Yorkshire

Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for North Yorkshire are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where fire door closers and ironmongery are needed

North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.

  • Failed closers and hinges
  • Busy corridors needing hold-open
  • Seal and signage replacement
  • Access control preparation

What you get with each doorset

ClosersOverhead and concealed closers to BS EN 1154
HingesCE/UKCA-marked butt hinges to BS EN 1935
Hold-openElectromagnetic and free-swing devices to BS EN 1155
Locks & latchesTo BS EN 12209, tested with the doorset
Seals & signsIntumescent and smoke seals; mandatory fire door signage
Elevation drawing of fire door ironmongery & closers

See the full specification and options for Fire Door Ironmongery & Closers

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in North Yorkshire

Can you fit just one door?

Yes — from a single door to a full building.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules apply in North Yorkshire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

How many hinges does a fire door need?

Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.

Towns in North Yorkshire we cover for fire door closers and ironmongery

Fire Door Ironmongery & Closers in neighbouring areas

Other fire doors in North Yorkshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.