FD60 fire doors in West Yorkshire: how we work
Across West Yorkshire we handle FD60 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
Regulations for FD60 fire doors in West Yorkshire
New and replacement fire doors in West Yorkshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in West Yorkshire
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in West Yorkshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in West Yorkshire
Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door?
Yes — from a single door to a full building.
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Towns in West Yorkshire we cover for FD60 fire doors
- Batley
- Bradford
- Brighouse
- Castleford
- Cleckheaton
- Dewsbury
- Guiseley
- Halifax
- Huddersfield
- Keighley
- Leeds
- Lofthouse
- Morley
- Ossett
- Pontefract
- Pudsey
- Shipley
- Wakefield
- Yeadon
FD60 Fire Doorsets in neighbouring areas
Other fire doors in West Yorkshire
- FD30 Fire Doorsets in West Yorkshire
- FD30S Smoke Control Doorsets in West Yorkshire
- FD90 & FD120 Doorsets in West Yorkshire
- Flat Entrance Fire Doors in West Yorkshire
- Communal & Corridor Fire Doors in West Yorkshire
- Stairwell & Escape Route Doors in West Yorkshire
- HMO Fire Doors in West Yorkshire
- Fire Doors for Homes in West Yorkshire
- Riser & Service Cupboard Doors in West Yorkshire
- Commercial & Office Fire Doors in West Yorkshire
- School & Healthcare Fire Doors in West Yorkshire
- Timber Fire Doorsets in West Yorkshire
- Composite Fire Doors in West Yorkshire
- Steel Fire Doors in West Yorkshire
- Glazed Fire Doors in West Yorkshire
- Double & Leaf-and-a-Half Fire Doors in West Yorkshire
- Fire-Rated Screens & Fanlights in West Yorkshire
- Acoustic Fire Doors in West Yorkshire
- Security Fire Doors in West Yorkshire
- Fire Exit Doors in West Yorkshire
- Fire Door Ironmongery & Closers in West Yorkshire
- Fire Door Replacement in West Yorkshire
- Fire Door Supply & Fit in West Yorkshire
- All fire doors in West Yorkshire