Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in York

We supply and fit FD60 fire doors in York (YO1) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in York, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 Fire Doorsets for York buildings

Getting FD60 fire doors right in York means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

York is one of the main towns we cover in North Yorkshire; tell us your dates and we'll arrange a survey.

What the law says in York

Fire doors in York sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

What do FD60 fire doors cost in York?

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for York are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD60 fire doors

Typical uses for FD60 fire doors in York include higher-risk stores and stair cores in taller blocks.

North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.

  • Higher-risk stores
  • Stair cores in taller blocks
  • Compartment walls
  • Plant and boiler rooms

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Tell us about the doors — photos help
  2. Free measure survey at your York property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Common questions in North Yorkshire

Do you cover York?

Yes. We survey, supply and fit FD60 fire doors throughout York and the rest of North Yorkshire, including YO1 and nearby Selby.

Can you work around tenants or staff in York?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in York.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

FD60 Fire Doorsets near York

Other fire doors in York

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.