Getting FD60 fire doors fitted in Harrogate
We fit FD60 doorsets for compartment walls, cores and plant rooms in Harrogate and the rest of North Yorkshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Harrogate is about 19 miles from York. Wherever your building is in HG2, we arrange survey and fitting dates around access and occupancy.
What the law says in Harrogate
New and replacement fire doors in Harrogate are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD60 fire doors in North Yorkshire
Guide prices for FD60 fire doors in Harrogate run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Harrogate
In Harrogate, FD60 fire doors are typically needed in plant and boiler rooms and compartment walls.
North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in North Yorkshire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Harrogate.
Can you fit just one door in Harrogate?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in North Yorkshire.
Is the survey in Harrogate free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Yeadon (11 miles)
- Guiseley (11 miles)
- Leeds (14 miles)
- Shipley (14 miles)
- Pudsey (14 miles)
- Bradford (16 miles)
More doorsets for Harrogate
- School & Healthcare Fire Doors in Harrogate
- Composite Fire Doors in Harrogate
- FD30 Fire Doorsets in Harrogate
- FD30S Smoke Control Doorsets in Harrogate
- Steel Fire Doors in Harrogate
- Fire Doors for Homes in Harrogate
- HMO Fire Doors in Harrogate
- Fire Door Replacement in Harrogate
- FD60 Fire Doorsets across North Yorkshire
- All fire doors in Harrogate