Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in North Yorkshire

We supply and fit FD30 fire doors throughout North Yorkshire, including York, Middlesbrough and Harrogate, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in North Yorkshire, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

FD30 fire doors in North Yorkshire: how we work

Throughout North Yorkshire, including York, Middlesbrough and Harrogate, we survey, quote and fit FD30 doorsets for flats, offices, HMOs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.

Which rules apply in North Yorkshire?

Fire doors in North Yorkshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

FD30 fire doors prices in North Yorkshire

Our guide price for FD30 fire doors in North Yorkshire is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD30 fire doors

North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.

  • Offices and retail back-of-house
  • HMO bedrooms and kitchens
  • Hotel corridors
  • Plant rooms and stores

Doorset specification

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

From enquiry to handover

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in North Yorkshire

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

How quickly can you survey in North Yorkshire?

We arrange surveys around your access needs and, where possible, combine visits with other work in North Yorkshire. Tell us your preferred dates when you enquire.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

How thick is an FD30 door?

Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.

Towns in North Yorkshire we cover for FD30 fire doors

FD30 Fire Doorsets in neighbouring areas

Other fire doors in North Yorkshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.