Getting FD60 fire doors fitted in Middlesbrough
Getting FD60 fire doors right in Middlesbrough means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Middlesbrough surveys with other visits in North Yorkshire, such as Billingham and Stockton-on-Tees, which helps keep survey dates flexible.
What the law says in Middlesbrough
New and replacement fire doors in Middlesbrough are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Middlesbrough?
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Middlesbrough, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are used in Middlesbrough
Typical uses for FD60 fire doors in Middlesbrough include stair cores in taller blocks and higher-risk stores.
North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Middlesbrough property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD60 fire doors in Middlesbrough: questions
Can you fit just one door in Middlesbrough?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in North Yorkshire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Middlesbrough.
What does a Middlesbrough quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Also covering towns near Middlesbrough
- Billingham (2 miles)
- Stockton-on-Tees (3 miles)
- Thornaby-on-Tees (4 miles)
- Redcar (7 miles)
- Hartlepool (7 miles)
- Darlington (13 miles)
More doorsets for Middlesbrough
- Stairwell & Escape Route Doors in Middlesbrough
- Flat Entrance Fire Doors in Middlesbrough
- Riser & Service Cupboard Doors in Middlesbrough
- HMO Fire Doors in Middlesbrough
- Double & Leaf-and-a-Half Fire Doors in Middlesbrough
- Fire Exit Doors in Middlesbrough
- Glazed Fire Doors in Middlesbrough
- Fire Door Replacement in Middlesbrough
- FD60 Fire Doorsets across North Yorkshire
- All fire doors in Middlesbrough