Our Shropshire supply and fit service
We supply and fit fire door closers and ironmongery across Shropshire, including Telford, Shrewsbury and Wellington. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
Fire door rules in Shropshire
Because Shropshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Fire door closers and ironmongery prices in Shropshire
Budget around £120 to £500 per item for fire door closers and ironmongery supplied and fitted in Shropshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are used in Shropshire
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Shropshire
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Towns in Shropshire we cover for fire door closers and ironmongery
Fire Door Ironmongery & Closers in neighbouring areas
Other fire doors in Shropshire
- FD30 Fire Doorsets in Shropshire
- FD30S Smoke Control Doorsets in Shropshire
- FD60 Fire Doorsets in Shropshire
- FD90 & FD120 Doorsets in Shropshire
- Flat Entrance Fire Doors in Shropshire
- Communal & Corridor Fire Doors in Shropshire
- Stairwell & Escape Route Doors in Shropshire
- HMO Fire Doors in Shropshire
- Fire Doors for Homes in Shropshire
- Riser & Service Cupboard Doors in Shropshire
- Commercial & Office Fire Doors in Shropshire
- School & Healthcare Fire Doors in Shropshire
- Timber Fire Doorsets in Shropshire
- Composite Fire Doors in Shropshire
- Steel Fire Doors in Shropshire
- Glazed Fire Doors in Shropshire
- Double & Leaf-and-a-Half Fire Doors in Shropshire
- Fire-Rated Screens & Fanlights in Shropshire
- Acoustic Fire Doors in Shropshire
- Security Fire Doors in Shropshire
- Fire Exit Doors in Shropshire
- Fire Door Replacement in Shropshire
- Fire Door Supply & Fit in Shropshire
- All fire doors in Shropshire