Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in Shropshire

We supply and fit FD30 fire doors throughout Shropshire, including Telford, Shrewsbury and Wellington, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in Shropshire, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

Our Shropshire supply and fit service

Our Shropshire service covers FD30 fire doors for flats, HMOs, workplaces, schools and homes, including Telford, Shrewsbury and Wellington.

Which rules apply in Shropshire?

New and replacement fire doors in Shropshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Cost of FD30 fire doors in Shropshire

Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Shropshire are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD30 fire doors are used in Shropshire

Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.

  • Offices and retail back-of-house
  • HMO bedrooms and kitchens
  • Hotel corridors
  • Plant rooms and stores

Doorset specification

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Do you cover the whole of Shropshire?

Yes. We survey, supply and fit FD30 fire doors across Shropshire, including Telford, Shrewsbury and Wellington.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

How quickly can you survey in Shropshire?

We arrange surveys around your access needs and, where possible, combine visits with other work in Shropshire. Tell us your preferred dates when you enquire.

Does an FD30 door need a self-closer?

Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.

Towns in Shropshire we cover for FD30 fire doors

FD30 Fire Doorsets in neighbouring areas

Other fire doors in Shropshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.