Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Shropshire

We supply and fit communal fire doors throughout Shropshire, including Telford, Shrewsbury and Wellington, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,600 per pair in Shropshire, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Certified communal fire doors for Shropshire

We supply and fit communal fire doors across Shropshire, including Telford, Shrewsbury and Wellington. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Fire door rules in Shropshire

Fire doors in Shropshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Guide prices in Shropshire

Our guide price for communal fire doors in Shropshire is £1,600 to £3,200 per pair including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Where communal fire doors are needed

Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.

  • Blocks of flats
  • Sheltered and supported housing
  • Student accommodation
  • Hotels

What's in the doorset

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Shropshire

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do you cover the whole of Shropshire?

Yes. We survey, supply and fit communal fire doors across Shropshire, including Telford, Shrewsbury and Wellington.

Should communal doors be glazed?

Doors across corridors usually need vision panels so people can see who is on the other side. The glass must be tested in that doorset.

Towns in Shropshire we cover for communal fire doors

Communal & Corridor Fire Doors in neighbouring areas

Other fire doors in Shropshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.