FD90 & FD120 Doorsets for Shropshire buildings
Throughout Shropshire, including Telford, Shrewsbury and Wellington, we survey, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.
Regulations for FD90 and FD120 fire doors in Shropshire
Fire doors in Shropshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Shropshire
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Shropshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are needed
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Shropshire
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules apply in Shropshire?
Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Towns in Shropshire we cover for FD90 and FD120 fire doors
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Shropshire
- FD30 Fire Doorsets in Shropshire
- FD30S Smoke Control Doorsets in Shropshire
- FD60 Fire Doorsets in Shropshire
- Flat Entrance Fire Doors in Shropshire
- Communal & Corridor Fire Doors in Shropshire
- Stairwell & Escape Route Doors in Shropshire
- HMO Fire Doors in Shropshire
- Fire Doors for Homes in Shropshire
- Riser & Service Cupboard Doors in Shropshire
- Commercial & Office Fire Doors in Shropshire
- School & Healthcare Fire Doors in Shropshire
- Timber Fire Doorsets in Shropshire
- Composite Fire Doors in Shropshire
- Steel Fire Doors in Shropshire
- Glazed Fire Doors in Shropshire
- Double & Leaf-and-a-Half Fire Doors in Shropshire
- Fire-Rated Screens & Fanlights in Shropshire
- Acoustic Fire Doors in Shropshire
- Security Fire Doors in Shropshire
- Fire Exit Doors in Shropshire
- Fire Door Ironmongery & Closers in Shropshire
- Fire Door Replacement in Shropshire
- Fire Door Supply & Fit in Shropshire
- All fire doors in Shropshire