Certified fire door closers and ironmongery for Shrewsbury
If your fire risk assessment in Shrewsbury has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in SY1 are free and quotes are fixed and itemised.
Shrewsbury is about 13 miles from Telford; we cover both, along with Wellington, Telford and Rhosllannerchrugog.
Which rules apply in Shrewsbury?
In Shrewsbury, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of fire door closers and ironmongery in Shropshire
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Shrewsbury are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Shrewsbury
Typical uses for fire door closers and ironmongery in Shrewsbury include busy corridors needing hold-open and access control preparation.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Busy corridors needing hold-open
- Access control preparation
- Failed closers and hinges
- Seal and signage replacement
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Shropshire
Can you work around tenants or staff in Shrewsbury?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Shrewsbury free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do fire door closers and ironmongery in Shrewsbury need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Fire Door Ironmongery & Closers near Shrewsbury
- Wellington (10 miles)
- Telford (13 miles)
- Rhosllannerchrugog (24 miles)
- Wrexham (25 miles)
- Newtown (27 miles)
- Stafford (27 miles)
Also available in Shrewsbury
- Glazed Fire Doors in Shrewsbury
- Fire Exit Doors in Shrewsbury
- FD30S Smoke Control Doorsets in Shrewsbury
- Fire Door Supply & Fit in Shrewsbury
- Double & Leaf-and-a-Half Fire Doors in Shrewsbury
- Fire-Rated Screens & Fanlights in Shrewsbury
- Commercial & Office Fire Doors in Shrewsbury
- HMO Fire Doors in Shrewsbury
- Fire Door Ironmongery & Closers across Shropshire
- All fire doors in Shrewsbury