Fire Door Ironmongery & Closers for Cheshire buildings
We supply and fit fire door closers and ironmongery across Cheshire, including Warrington, Chester and Crewe. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
Regulations for fire door closers and ironmongery in Cheshire
New and replacement fire doors in Cheshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Fire door closers and ironmongery prices in Cheshire
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Cheshire quote is fixed after survey and itemised door by door.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Cheshire
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about fire door closers and ironmongery in Cheshire
Which rules apply in Cheshire?
Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover the whole of Cheshire?
Yes. We survey, supply and fit fire door closers and ironmongery across Cheshire, including Warrington, Chester and Crewe.
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Towns in Cheshire we cover for fire door closers and ironmongery
- Chester
- Congleton
- Crewe
- Ellesmere Port
- Great Sankey
- Macclesfield
- Northwich
- Runcorn
- Warrington
- Widnes
- Wilmslow
- Winsford
Fire Door Ironmongery & Closers in neighbouring areas
Other fire doors in Cheshire
- FD30 Fire Doorsets in Cheshire
- FD30S Smoke Control Doorsets in Cheshire
- FD60 Fire Doorsets in Cheshire
- FD90 & FD120 Doorsets in Cheshire
- Flat Entrance Fire Doors in Cheshire
- Communal & Corridor Fire Doors in Cheshire
- Stairwell & Escape Route Doors in Cheshire
- HMO Fire Doors in Cheshire
- Fire Doors for Homes in Cheshire
- Riser & Service Cupboard Doors in Cheshire
- Commercial & Office Fire Doors in Cheshire
- School & Healthcare Fire Doors in Cheshire
- Timber Fire Doorsets in Cheshire
- Composite Fire Doors in Cheshire
- Steel Fire Doors in Cheshire
- Glazed Fire Doors in Cheshire
- Double & Leaf-and-a-Half Fire Doors in Cheshire
- Fire-Rated Screens & Fanlights in Cheshire
- Acoustic Fire Doors in Cheshire
- Security Fire Doors in Cheshire
- Fire Exit Doors in Cheshire
- Fire Door Replacement in Cheshire
- Fire Door Supply & Fit in Cheshire
- All fire doors in Cheshire