Fire Door Ironmongery & Closers for Wellington buildings
We fit fire door closers, hinges and hold-open devices in Wellington and the rest of Shropshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover TF1 and the surrounding area, including Telford. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Wellington?
Because Wellington is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Wellington
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Wellington are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Wellington include failed closers and hinges and busy corridors needing hold-open.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Wellington
How quickly can you survey in Wellington?
We arrange surveys around your access needs and, where possible, combine Wellington visits with other work in Shropshire. Tell us your preferred dates when you enquire.
What does a Wellington quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you work for landlords and managing agents in Wellington?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Also covering towns near Wellington
- Telford (3 miles)
- Shrewsbury (10 miles)
- Stafford (18 miles)
- Wolverhampton (18 miles)
- Wednesfield (19 miles)
- Kingswinford (20 miles)
More doorsets for Wellington
- Fire Exit Doors in Wellington
- Stairwell & Escape Route Doors in Wellington
- School & Healthcare Fire Doors in Wellington
- Glazed Fire Doors in Wellington
- Communal & Corridor Fire Doors in Wellington
- Security Fire Doors in Wellington
- Fire Door Replacement in Wellington
- Fire Door Supply & Fit in Wellington
- Fire Door Ironmongery & Closers across Shropshire
- All fire doors in Wellington