Getting FD90 and FD120 fire doors fitted in Cheshire
Across Cheshire we handle FD90 and FD120 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
Regulations for FD90 and FD120 fire doors in Cheshire
In Cheshire, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD90 and FD120 fire doors prices in Cheshire
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Cheshire are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Cheshire
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Cheshire
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door?
Yes — from a single door to a full building.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Towns in Cheshire we cover for FD90 and FD120 fire doors
- Chester
- Congleton
- Crewe
- Ellesmere Port
- Great Sankey
- Macclesfield
- Northwich
- Runcorn
- Warrington
- Widnes
- Wilmslow
- Winsford
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Cheshire
- FD30 Fire Doorsets in Cheshire
- FD30S Smoke Control Doorsets in Cheshire
- FD60 Fire Doorsets in Cheshire
- Flat Entrance Fire Doors in Cheshire
- Communal & Corridor Fire Doors in Cheshire
- Stairwell & Escape Route Doors in Cheshire
- HMO Fire Doors in Cheshire
- Fire Doors for Homes in Cheshire
- Riser & Service Cupboard Doors in Cheshire
- Commercial & Office Fire Doors in Cheshire
- School & Healthcare Fire Doors in Cheshire
- Timber Fire Doorsets in Cheshire
- Composite Fire Doors in Cheshire
- Steel Fire Doors in Cheshire
- Glazed Fire Doors in Cheshire
- Double & Leaf-and-a-Half Fire Doors in Cheshire
- Fire-Rated Screens & Fanlights in Cheshire
- Acoustic Fire Doors in Cheshire
- Security Fire Doors in Cheshire
- Fire Exit Doors in Cheshire
- Fire Door Ironmongery & Closers in Cheshire
- Fire Door Replacement in Cheshire
- Fire Door Supply & Fit in Cheshire
- All fire doors in Cheshire