Our Staffordshire supply and fit service
Across Staffordshire we handle FD90 and FD120 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
Regulations for FD90 and FD120 fire doors in Staffordshire
Fire doors in Staffordshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD90 and FD120 fire doors prices in Staffordshire
Guide prices for FD90 and FD120 fire doors in Staffordshire run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Staffordshire
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD90 and FD120 fire doors in Staffordshire: questions
Can you fit just one door?
Yes — from a single door to a full building.
Which rules apply in Staffordshire?
Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Towns in Staffordshire we cover for FD90 and FD120 fire doors
- Burntwood
- Burton upon Trent
- Cannock
- Kidsgrove
- Lichfield
- Longton
- Newcastle-under-Lyme
- Rugeley
- Stafford
- Stoke-on-Trent
- Tamworth
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Staffordshire
- FD30 Fire Doorsets in Staffordshire
- FD30S Smoke Control Doorsets in Staffordshire
- FD60 Fire Doorsets in Staffordshire
- Flat Entrance Fire Doors in Staffordshire
- Communal & Corridor Fire Doors in Staffordshire
- Stairwell & Escape Route Doors in Staffordshire
- HMO Fire Doors in Staffordshire
- Fire Doors for Homes in Staffordshire
- Riser & Service Cupboard Doors in Staffordshire
- Commercial & Office Fire Doors in Staffordshire
- School & Healthcare Fire Doors in Staffordshire
- Timber Fire Doorsets in Staffordshire
- Composite Fire Doors in Staffordshire
- Steel Fire Doors in Staffordshire
- Glazed Fire Doors in Staffordshire
- Double & Leaf-and-a-Half Fire Doors in Staffordshire
- Fire-Rated Screens & Fanlights in Staffordshire
- Acoustic Fire Doors in Staffordshire
- Security Fire Doors in Staffordshire
- Fire Exit Doors in Staffordshire
- Fire Door Ironmongery & Closers in Staffordshire
- Fire Door Replacement in Staffordshire
- Fire Door Supply & Fit in Staffordshire
- All fire doors in Staffordshire