Getting FD90 and FD120 fire doors fitted in Wellington
If your fire risk assessment in Wellington has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in TF1 are free and quotes are fixed and itemised.
Wellington is about 3 miles from Telford. Wherever your building is in TF1, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Wellington?
Fire doors in Wellington sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Shropshire
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Wellington quote is fixed after survey and itemised door by door.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Wellington, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and high fire-load stores.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Wellington
What does a Wellington quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Wellington?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How quickly can you survey in Wellington?
We arrange surveys around your access needs and, where possible, combine Wellington visits with other work in Shropshire. Tell us your preferred dates when you enquire.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Telford (3 miles)
- Shrewsbury (10 miles)
- Stafford (18 miles)
- Wolverhampton (18 miles)
- Wednesfield (19 miles)
- Kingswinford (20 miles)
Other products in Wellington
- Composite Fire Doors in Wellington
- Steel Fire Doors in Wellington
- Fire Door Ironmongery & Closers in Wellington
- Flat Entrance Fire Doors in Wellington
- Double & Leaf-and-a-Half Fire Doors in Wellington
- School & Healthcare Fire Doors in Wellington
- FD30 Fire Doorsets in Wellington
- Timber Fire Doorsets in Wellington
- FD90 & FD120 Doorsets across Shropshire
- All fire doors in Wellington