Our Wellington supply and fit service
We fit FD60 doorsets for compartment walls, cores and plant rooms in Wellington and the rest of Shropshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Wellington is about 3 miles from Telford; we cover both, along with Telford, Shrewsbury and Stafford.
Fire door rules in Wellington
In Wellington, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Wellington
Our guide price for FD60 fire doors in Wellington is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are used in Wellington
Typical uses for FD60 fire doors in Wellington include higher-risk stores and stair cores in taller blocks.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Shropshire
What does a Wellington quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Wellington?
We arrange surveys around your access needs and, where possible, combine Wellington visits with other work in Shropshire. Tell us your preferred dates when you enquire.
Do you cover Wellington?
Yes. We survey, supply and fit FD60 fire doors throughout Wellington and the rest of Shropshire, including TF1 and nearby Telford.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Nearby towns we cover
- Telford (3 miles)
- Shrewsbury (10 miles)
- Stafford (18 miles)
- Wolverhampton (18 miles)
- Wednesfield (19 miles)
- Kingswinford (20 miles)
Also available in Wellington
- Composite Fire Doors in Wellington
- Fire Doors for Homes in Wellington
- Communal & Corridor Fire Doors in Wellington
- Glazed Fire Doors in Wellington
- Stairwell & Escape Route Doors in Wellington
- Fire-Rated Screens & Fanlights in Wellington
- FD90 & FD120 Doorsets in Wellington
- FD30S Smoke Control Doorsets in Wellington
- FD60 Fire Doorsets across Shropshire
- All fire doors in Wellington