FD60 Fire Doorsets for Kent buildings
We supply and fit FD60 fire doors across Kent, including Maidstone, Gillingham and Chatham. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
Fire door rules in Kent
New and replacement fire doors in Kent are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Kent?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Kent are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are used in Kent
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How quickly can you survey in Kent?
We arrange surveys around your access needs and, where possible, combine visits with other work in Kent. Tell us your preferred dates when you enquire.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Towns in Kent we cover for FD60 fire doors
- Ashford, Kent
- Broadstairs
- Canterbury
- Chatham
- Dartford
- Deal
- Dover
- Faversham
- Folkestone
- Gillingham
- Gravesend
- Herne Bay
- Maidstone
- Margate
- Ramsgate
- Rochester
- Sevenoaks
- Sittingbourne
- Strood
- Swanley
- Tonbridge
- Tunbridge Wells
- Whitstable
FD60 Fire Doorsets in neighbouring areas
Other fire doors in Kent
- FD30 Fire Doorsets in Kent
- FD30S Smoke Control Doorsets in Kent
- FD90 & FD120 Doorsets in Kent
- Flat Entrance Fire Doors in Kent
- Communal & Corridor Fire Doors in Kent
- Stairwell & Escape Route Doors in Kent
- HMO Fire Doors in Kent
- Fire Doors for Homes in Kent
- Riser & Service Cupboard Doors in Kent
- Commercial & Office Fire Doors in Kent
- School & Healthcare Fire Doors in Kent
- Timber Fire Doorsets in Kent
- Composite Fire Doors in Kent
- Steel Fire Doors in Kent
- Glazed Fire Doors in Kent
- Double & Leaf-and-a-Half Fire Doors in Kent
- Fire-Rated Screens & Fanlights in Kent
- Acoustic Fire Doors in Kent
- Security Fire Doors in Kent
- Fire Exit Doors in Kent
- Fire Door Ironmongery & Closers in Kent
- Fire Door Replacement in Kent
- Fire Door Supply & Fit in Kent
- All fire doors in Kent