Flat Entrance Fire Doors for Kent buildings
Across Kent we handle flat entrance fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
What the law says in Kent
Fire doors in Kent sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of flat entrance fire doors in Kent
Our guide price for flat entrance fire doors in Kent is £1,250 to £2,300 per door including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need flat entrance fire doors
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Blocks of flats
- Converted buildings with shared stairs
- Student and build-to-rent blocks
- Supported housing
Doorset specification
| Fire & smoke | FD30S / E30 Sa as standard |
|---|---|
| Security | PAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England |
| Hardware | Self-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested |
| Materials | Timber, composite or steel-faced |
| Acoustic | Acoustic-rated options for noisy corridors |
See the full specification and options for Flat Entrance Fire Doors
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Flat entrance fire doors in Kent: questions
Do you cover the whole of Kent?
Yes. We survey, supply and fit flat entrance fire doors across Kent, including Maidstone, Gillingham and Chatham.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
How quickly can you survey in Kent?
We arrange surveys around your access needs and, where possible, combine visits with other work in Kent. Tell us your preferred dates when you enquire.
How long does fitting take?
A single flat entrance doorset usually takes a few hours to fit, including the new frame. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Towns in Kent we cover for flat entrance fire doors
- Ashford, Kent
- Broadstairs
- Canterbury
- Chatham
- Dartford
- Deal
- Dover
- Faversham
- Folkestone
- Gillingham
- Gravesend
- Herne Bay
- Maidstone
- Margate
- Ramsgate
- Rochester
- Sevenoaks
- Sittingbourne
- Strood
- Swanley
- Tonbridge
- Tunbridge Wells
- Whitstable
Flat Entrance Fire Doors in neighbouring areas
Other fire doors in Kent
- FD30 Fire Doorsets in Kent
- FD30S Smoke Control Doorsets in Kent
- FD60 Fire Doorsets in Kent
- FD90 & FD120 Doorsets in Kent
- Communal & Corridor Fire Doors in Kent
- Stairwell & Escape Route Doors in Kent
- HMO Fire Doors in Kent
- Fire Doors for Homes in Kent
- Riser & Service Cupboard Doors in Kent
- Commercial & Office Fire Doors in Kent
- School & Healthcare Fire Doors in Kent
- Timber Fire Doorsets in Kent
- Composite Fire Doors in Kent
- Steel Fire Doors in Kent
- Glazed Fire Doors in Kent
- Double & Leaf-and-a-Half Fire Doors in Kent
- Fire-Rated Screens & Fanlights in Kent
- Acoustic Fire Doors in Kent
- Security Fire Doors in Kent
- Fire Exit Doors in Kent
- Fire Door Ironmongery & Closers in Kent
- Fire Door Replacement in Kent
- Fire Door Supply & Fit in Kent
- All fire doors in Kent