FD60 Fire Doorsets for Sevenoaks buildings
Fire Rated Doors supplies and fits FD60 fire doors in Sevenoaks, Kent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Sevenoaks surveys with other visits in Kent, such as Tonbridge and Swanley, which helps keep survey dates flexible.
What the law says in Sevenoaks
New and replacement fire doors in Sevenoaks are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Sevenoaks
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Sevenoaks, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Sevenoaks
Stair cores in taller blocks and plant and boiler rooms are among the most common settings for FD60 fire doors, in Sevenoaks as elsewhere.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Sevenoaks
How quickly can you survey in Sevenoaks?
We arrange surveys around your access needs and, where possible, combine Sevenoaks visits with other work in Kent. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Sevenoaks?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Sevenoaks free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Sevenoaks
- Tonbridge (6 miles)
- Swanley (9 miles)
- Tunbridge Wells (10 miles)
- Caterham (12 miles)
- Bexley (12 miles)
- Dartford (12 miles)
More doorsets for Sevenoaks
- HMO Fire Doors in Sevenoaks
- Timber Fire Doorsets in Sevenoaks
- FD90 & FD120 Doorsets in Sevenoaks
- Stairwell & Escape Route Doors in Sevenoaks
- FD30 Fire Doorsets in Sevenoaks
- Riser & Service Cupboard Doors in Sevenoaks
- Steel Fire Doors in Sevenoaks
- Communal & Corridor Fire Doors in Sevenoaks
- FD60 Fire Doorsets across Kent
- All fire doors in Sevenoaks