Getting FD60 fire doors fitted in Margate
We cover Margate and nearby Broadstairs for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Margate is about 39 miles from Maidstone; we cover both, along with Broadstairs, Ramsgate and Deal.
Fire door rules in Margate
Fire doors in Margate sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD60 fire doors prices in Margate
Guide prices for FD60 fire doors in Margate run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD60 fire doors
Wherever they are in Margate, FD60 fire doors are most often specified for stair cores in taller blocks and higher-risk stores.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Margate: questions
Do you cover Margate?
Yes. We survey, supply and fit FD60 fire doors throughout Margate and the rest of Kent, including CT9 and nearby Broadstairs.
What does a Margate quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD60 fire doors in Margate need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Nearby towns we cover
- Broadstairs (3 miles)
- Ramsgate (4 miles)
- Deal (11 miles)
- Herne Bay (11 miles)
- Canterbury (15 miles)
- Whitstable (16 miles)
More doorsets for Margate
- Steel Fire Doors in Margate
- Communal & Corridor Fire Doors in Margate
- Commercial & Office Fire Doors in Margate
- Fire Doors for Homes in Margate
- Riser & Service Cupboard Doors in Margate
- School & Healthcare Fire Doors in Margate
- Fire Door Ironmongery & Closers in Margate
- Fire-Rated Screens & Fanlights in Margate
- FD60 Fire Doorsets across Kent
- All fire doors in Margate