Getting FD30S fire doors fitted in Kent
We supply and fit FD30S fire doors across Kent, including Maidstone, Gillingham and Chatham. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
What the law says in Kent
Fire doors in Kent sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30S fire doors cost in Kent?
Our guide price for FD30S fire doors in Kent is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD30S fire doors
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Protected stairways
- Cross-corridor doors
- Integral garage doors
- Lobby doors in blocks of flats
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
How it works in Kent
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30S fire doors in Kent
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How quickly can you survey in Kent?
We arrange surveys around your access needs and, where possible, combine visits with other work in Kent. Tell us your preferred dates when you enquire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Towns in Kent we cover for FD30S fire doors
- Ashford, Kent
- Broadstairs
- Canterbury
- Chatham
- Dartford
- Deal
- Dover
- Faversham
- Folkestone
- Gillingham
- Gravesend
- Herne Bay
- Maidstone
- Margate
- Ramsgate
- Rochester
- Sevenoaks
- Sittingbourne
- Strood
- Swanley
- Tonbridge
- Tunbridge Wells
- Whitstable
FD30S Smoke Control Doorsets in neighbouring areas
Other fire doors in Kent
- FD30 Fire Doorsets in Kent
- FD60 Fire Doorsets in Kent
- FD90 & FD120 Doorsets in Kent
- Flat Entrance Fire Doors in Kent
- Communal & Corridor Fire Doors in Kent
- Stairwell & Escape Route Doors in Kent
- HMO Fire Doors in Kent
- Fire Doors for Homes in Kent
- Riser & Service Cupboard Doors in Kent
- Commercial & Office Fire Doors in Kent
- School & Healthcare Fire Doors in Kent
- Timber Fire Doorsets in Kent
- Composite Fire Doors in Kent
- Steel Fire Doors in Kent
- Glazed Fire Doors in Kent
- Double & Leaf-and-a-Half Fire Doors in Kent
- Fire-Rated Screens & Fanlights in Kent
- Acoustic Fire Doors in Kent
- Security Fire Doors in Kent
- Fire Exit Doors in Kent
- Fire Door Ironmongery & Closers in Kent
- Fire Door Replacement in Kent
- Fire Door Supply & Fit in Kent
- All fire doors in Kent