Our Tunbridge Wells supply and fit service
We fit FD60 doorsets for compartment walls, cores and plant rooms in Tunbridge Wells and the rest of Kent. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Tunbridge Wells is about 14 miles from Maidstone. Wherever your building is in TN1, we arrange survey and fitting dates around access and occupancy.
What the law says in Tunbridge Wells
Because Tunbridge Wells is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Kent
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Tunbridge Wells are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Tunbridge Wells
Typical uses for FD60 fire doors in Tunbridge Wells include plant and boiler rooms and stair cores in taller blocks.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Kent
Do you work for landlords and managing agents in Tunbridge Wells?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Will I get certificates for the doors fitted in Tunbridge Wells?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Tunbridge Wells?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Nearby towns we cover
- Tonbridge (4 miles)
- Crowborough (7 miles)
- Sevenoaks (10 miles)
- East Grinstead (12 miles)
- Maidstone (14 miles)
- Caterham (18 miles)
Also available in Tunbridge Wells
- Communal & Corridor Fire Doors in Tunbridge Wells
- Acoustic Fire Doors in Tunbridge Wells
- Glazed Fire Doors in Tunbridge Wells
- HMO Fire Doors in Tunbridge Wells
- Composite Fire Doors in Tunbridge Wells
- School & Healthcare Fire Doors in Tunbridge Wells
- FD90 & FD120 Doorsets in Tunbridge Wells
- Fire Door Ironmongery & Closers in Tunbridge Wells
- FD60 Fire Doorsets across Kent
- All fire doors in Tunbridge Wells