Our Swanley supply and fit service
Fire Rated Doors supplies and fits FD60 fire doors in Swanley, Kent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Swanley or on its edges towards Bexley, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Swanley
In Swanley, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Swanley
Our guide price for FD60 fire doors in Swanley is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Swanley
Wherever they are in Swanley, FD60 fire doors are most often specified for plant and boiler rooms and higher-risk stores.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Kent
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Swanley.
What does a Swanley quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you work for landlords and managing agents in Swanley?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Bexley (3 miles)
- Dartford (4 miles)
- Welling (6 miles)
- Eltham (6 miles)
- Thamesmead (7 miles)
- Grays (9 miles)
Other products in Swanley
- Fire Door Supply & Fit in Swanley
- Riser & Service Cupboard Doors in Swanley
- School & Healthcare Fire Doors in Swanley
- FD90 & FD120 Doorsets in Swanley
- Steel Fire Doors in Swanley
- Stairwell & Escape Route Doors in Swanley
- Composite Fire Doors in Swanley
- Fire Door Ironmongery & Closers in Swanley
- FD60 Fire Doorsets across Kent
- All fire doors in Swanley