Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Washington

We supply and fit FD30S fire doors in Washington (NE38) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £800 per single doorset in Washington, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Our Washington supply and fit service

Need FD30S fire doors in Washington? We supply and fit complete certified doorsets across Tyne and Wear, starting with a free measure survey in and around NE38. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.

Washington is about 6 miles from Newcastle upon Tyne; we cover both, along with Chester-le-Street, Felling and Houghton-le-Spring.

Fire door rules in Washington

Fire doors in Washington sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Guide prices in Washington

Our guide price for FD30S fire doors in Washington is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD30S fire doors

In Washington, FD30S fire doors are typically needed in cross-corridor doors and integral garage doors.

Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.

  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats
  • Protected stairways

FD30S Smoke Control Doorsets: key specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

FD30S fire doors in Washington: questions

Which rules do FD30S fire doors in Washington need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can you fit just one door in Washington?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Tyne and Wear.

What does a Washington quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Neighbouring areas

Also available in Washington

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.