Certified FD30S fire doors for Tynemouth
Getting FD30S fire doors right in Tynemouth means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Tynemouth surveys with other visits in Tyne and Wear, such as North Shields and South Shields, which helps keep survey dates flexible.
Fire door rules in Tynemouth
New and replacement fire doors in Tynemouth are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Tynemouth
Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Tynemouth quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD30S fire doors are needed
Typical uses for FD30S fire doors in Tynemouth include cross-corridor doors and integral garage doors.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Cross-corridor doors
- Integral garage doors
- Lobby doors in blocks of flats
- Protected stairways
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30S fire doors in Tynemouth
What does a Tynemouth quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you cover Tynemouth?
Yes. We survey, supply and fit FD30S fire doors throughout Tynemouth and the rest of Tyne and Wear, including NE30 and nearby North Shields.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Tynemouth.
Which doors in a block of flats need FD30S?
Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.
Neighbouring areas
- North Shields (1 mile)
- South Shields (1 mile)
- Whitley Bay (2 miles)
- Jarrow (4 miles)
- Wallsend (5 miles)
- Hebburn (5 miles)
More doorsets for Tynemouth
- HMO Fire Doors in Tynemouth
- Glazed Fire Doors in Tynemouth
- Commercial & Office Fire Doors in Tynemouth
- Steel Fire Doors in Tynemouth
- Fire Door Supply & Fit in Tynemouth
- Composite Fire Doors in Tynemouth
- Fire Doors for Homes in Tynemouth
- Riser & Service Cupboard Doors in Tynemouth
- FD30S Smoke Control Doorsets across Tyne and Wear
- All fire doors in Tynemouth