Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in County Durham

We supply and fit FD30S fire doors throughout County Durham, including Darlington, Hartlepool and Stockton-on-Tees, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in County Durham, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in County Durham

Throughout County Durham, including Darlington, Hartlepool and Stockton-on-Tees, we survey, quote and fit FD30S smoke control doorsets for flats, stairs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.

What the law says in County Durham

In County Durham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Cost of FD30S fire doors in County Durham

Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for County Durham are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Typical uses in County Durham

County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

FD30S Smoke Control Doorsets: key specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in County Durham

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Which rules apply in County Durham?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

Towns in County Durham we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in County Durham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.