FD30S fire doors in Hebburn: how we work
We fit FD30S smoke control doorsets for flats, stairs and corridors in Hebburn and the rest of Tyne and Wear. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Hebburn is about 4 miles from Newcastle upon Tyne. Wherever your building is in NE31, we arrange survey and fitting dates around access and occupancy.
Regulations for FD30S fire doors in Tyne and Wear
Fire doors in Hebburn sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD30S fire doors in Tyne and Wear
Our guide price for FD30S fire doors in Hebburn is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are used in Hebburn
Typical uses for FD30S fire doors in Hebburn include lobby doors in blocks of flats and cross-corridor doors.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Lobby doors in blocks of flats
- Cross-corridor doors
- Integral garage doors
- Protected stairways
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Tyne and Wear
Do you cover Hebburn?
Yes. We survey, supply and fit FD30S fire doors throughout Hebburn and the rest of Tyne and Wear, including NE31 and nearby Jarrow.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hebburn.
Can you fit just one door in Hebburn?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Tyne and Wear.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Also covering towns near Hebburn
- Jarrow (1 mile)
- Wallsend (1 mile)
- Felling (2 miles)
- Gateshead (4 miles)
- South Shields (4 miles)
- Newcastle upon Tyne (4 miles)
More doorsets for Hebburn
- Fire Door Replacement in Hebburn
- Commercial & Office Fire Doors in Hebburn
- Fire Door Supply & Fit in Hebburn
- FD30 Fire Doorsets in Hebburn
- School & Healthcare Fire Doors in Hebburn
- Composite Fire Doors in Hebburn
- Acoustic Fire Doors in Hebburn
- Fire Door Ironmongery & Closers in Hebburn
- FD30S Smoke Control Doorsets across Tyne and Wear
- All fire doors in Hebburn