Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Lancashire

We supply and fit FD90 and FD120 fire doors throughout Lancashire, including Preston, Burnley and Blackburn, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in Lancashire, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

FD90 and FD120 fire doors in Lancashire: how we work

Throughout Lancashire, including Preston, Burnley and Blackburn, we survey, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.

Regulations for FD90 and FD120 fire doors in Lancashire

New and replacement fire doors in Lancashire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Guide prices in Lancashire

Our guide price for FD90 and FD120 fire doors in Lancashire is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Where FD90 and FD120 fire doors are needed

Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

What you get with each doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Questions about FD90 and FD120 fire doors in Lancashire

Do you cover the whole of Lancashire?

Yes. We survey, supply and fit FD90 and FD120 fire doors across Lancashire, including Preston, Burnley and Blackburn.

How quickly can you survey in Lancashire?

We arrange surveys around your access needs and, where possible, combine visits with other work in Lancashire. Tell us your preferred dates when you enquire.

Which rules apply in Lancashire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Towns in Lancashire we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in Lancashire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.