FD90 and FD120 fire doors in Preston: how we work
Need FD90 and FD120 fire doors in Preston? We supply and fit complete certified doorsets across Lancashire, starting with a free measure survey in and around PR1. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Preston is one of the main towns we cover in Lancashire; tell us your dates and we'll arrange a survey.
Which rules apply in Preston?
Because Preston is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Lancashire
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Preston quote is fixed after survey and itemised door by door.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are used in Preston
Wherever they are in Preston, FD90 and FD120 fire doors are most often specified for generator rooms and high fire-load stores.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Lancashire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Preston.
Can you work around tenants or staff in Preston?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Preston quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Leyland (4 miles)
- Chorley (9 miles)
- Blackburn (9 miles)
- Darwen (11 miles)
- Lytham St Annes (12 miles)
- Accrington (14 miles)
Other fire doors in Preston
- FD30S Smoke Control Doorsets in Preston
- Steel Fire Doors in Preston
- Fire Door Replacement in Preston
- Fire Door Supply & Fit in Preston
- FD60 Fire Doorsets in Preston
- HMO Fire Doors in Preston
- Fire Exit Doors in Preston
- Security Fire Doors in Preston
- FD90 & FD120 Doorsets across Lancashire
- All fire doors in Preston