Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in West Yorkshire

We supply and fit FD90 and FD120 fire doors throughout West Yorkshire, including Leeds, Bradford and Huddersfield, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in West Yorkshire, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

FD90 and FD120 fire doors in West Yorkshire: how we work

Throughout West Yorkshire, including Leeds, Bradford and Huddersfield, we survey, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.

Regulations for FD90 and FD120 fire doors in West Yorkshire

In West Yorkshire, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD90 and FD120 fire doors cost in West Yorkshire?

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your West Yorkshire quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD90 and FD120 fire doors

Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

FD90 & FD120 Doorsets: key specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Which rules apply in West Yorkshire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you cover the whole of West Yorkshire?

Yes. We survey, supply and fit FD90 and FD120 fire doors across West Yorkshire, including Leeds, Bradford and Huddersfield.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can FD120 doors have glass?

Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.

Towns in West Yorkshire we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in West Yorkshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.