Certified FD90 and FD120 fire doors for Blackburn
Getting FD90 and FD120 fire doors right in Blackburn means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Blackburn is about 9 miles from Preston. Wherever your building is in BB2, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Blackburn?
In Blackburn, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD90 and FD120 fire doors prices in Blackburn
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Blackburn quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Blackburn
Typical uses for FD90 and FD120 fire doors in Blackburn include high fire-load stores and generator rooms.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Blackburn property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD90 and FD120 fire doors in Blackburn
Do you cover Blackburn?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Blackburn and the rest of Lancashire, including BB2 and nearby Darwen.
Will I get certificates for the doors fitted in Blackburn?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Blackburn.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Darwen (4 miles)
- Accrington (5 miles)
- Chorley (9 miles)
- Rawtenstall (9 miles)
- Preston (9 miles)
- Leyland (9 miles)
Other fire doors in Blackburn
- Fire Exit Doors in Blackburn
- FD30 Fire Doorsets in Blackburn
- FD60 Fire Doorsets in Blackburn
- FD30S Smoke Control Doorsets in Blackburn
- Fire Door Supply & Fit in Blackburn
- Timber Fire Doorsets in Blackburn
- Flat Entrance Fire Doors in Blackburn
- Glazed Fire Doors in Blackburn
- FD90 & FD120 Doorsets across Lancashire
- All fire doors in Blackburn