FD90 & FD120 Doorsets for Colne buildings
For landlords, managing agents, businesses and homeowners in Colne, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Colne is about 23 miles from Preston; we cover both, along with Nelson, Burnley and Accrington.
Regulations for FD90 and FD120 fire doors in Lancashire
Because Colne is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Colne?
Guide prices for FD90 and FD120 fire doors in Colne run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Colne, FD90 and FD120 fire doors are most often specified for separating walls with long ratings and generator rooms.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Colne
Can you work around tenants or staff in Colne?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Colne?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Colne free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Colne
- Nelson (2 miles)
- Burnley (5 miles)
- Accrington (11 miles)
- Keighley (11 miles)
- Rawtenstall (12 miles)
- Blackburn (15 miles)
Also available in Colne
- Stairwell & Escape Route Doors in Colne
- HMO Fire Doors in Colne
- Commercial & Office Fire Doors in Colne
- Communal & Corridor Fire Doors in Colne
- FD30 Fire Doorsets in Colne
- Composite Fire Doors in Colne
- Timber Fire Doorsets in Colne
- Glazed Fire Doors in Colne
- FD90 & FD120 Doorsets across Lancashire
- All fire doors in Colne