Certified FD90 and FD120 fire doors for Consett
Looking for FD90 and FD120 fire doors in Consett? Our supply and fit service covers DH8 and the surrounding area, including Stanley and Newburn. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Consett is about 25 miles from Darlington. Wherever your building is in DH8, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Consett?
In Consett, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Consett
Guide prices for FD90 and FD120 fire doors in Consett run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD90 and FD120 fire doors
In Consett, FD90 and FD120 fire doors are typically needed in transformer and switch rooms and separating walls with long ratings.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Transformer and switch rooms
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Consett
Can you fit just one door in Consett?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in County Durham.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Consett.
Which rules do FD90 and FD120 fire doors in Consett need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Consett
- Stanley (6 miles)
- Newburn (10 miles)
- Chester-le-Street (10 miles)
- Durham (12 miles)
- Gateshead (12 miles)
- Newcastle upon Tyne (12 miles)
More doorsets for Consett
- FD60 Fire Doorsets in Consett
- Fire Door Supply & Fit in Consett
- Commercial & Office Fire Doors in Consett
- Flat Entrance Fire Doors in Consett
- Stairwell & Escape Route Doors in Consett
- Glazed Fire Doors in Consett
- HMO Fire Doors in Consett
- Fire Exit Doors in Consett
- FD90 & FD120 Doorsets across County Durham
- All fire doors in Consett