Our Billingham supply and fit service
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Billingham and the rest of County Durham. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover TS23 and the surrounding area, including Stockton-on-Tees. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Billingham
Because Billingham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in County Durham
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Billingham are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Billingham include transformer and switch rooms and high fire-load stores.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Billingham
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in County Durham
Can you work around tenants or staff in Billingham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Billingham.
How quickly can you survey in Billingham?
We arrange surveys around your access needs and, where possible, combine Billingham visits with other work in County Durham. Tell us your preferred dates when you enquire.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Also covering towns near Billingham
- Stockton-on-Tees (2 miles)
- Middlesbrough (2 miles)
- Thornaby-on-Tees (4 miles)
- Hartlepool (7 miles)
- Redcar (9 miles)
- Darlington (11 miles)
Other fire doors in Billingham
- Acoustic Fire Doors in Billingham
- Flat Entrance Fire Doors in Billingham
- Timber Fire Doorsets in Billingham
- FD60 Fire Doorsets in Billingham
- Double & Leaf-and-a-Half Fire Doors in Billingham
- Commercial & Office Fire Doors in Billingham
- Communal & Corridor Fire Doors in Billingham
- FD30 Fire Doorsets in Billingham
- FD90 & FD120 Doorsets across County Durham
- All fire doors in Billingham